Blue Elephant

CNC Controller System

Position: Home > User Guide > CNC Controller System

The knowledge and skills you want are here.

How To Work In DSP A11 Handle Control System
How To Continue To Work After Set The Breakpoint In Mach3 Control System

The steps are as follows. Press “Feed Hold” to pause Press ‘Cycle Start“to continue The video is as follow.

Read more
How To Work In DSP A11 Handle Control System
How To Adjust Working Speed In Mach3 Control System

The steps are as follows. Press “Spindle CW F5”,start the spindle Press “+”in spindle speed,let spindle speed up Press pillar is another way to increase or decrease the speedWhen the value of  feed rate is very low,the machine will work slo...
Read more
How To Work In DSP A11 Handle Control System
How To Adjust "Jog Rate" In Mach3 Control System

The steps are as follows. Press “Tab”to open “MPG”interface. Press red “—”button to decrease the speed The machine move slowly in low rate Press green “+”button to increase the speed The machine move quickly in ...
Read more
How To Work In DSP A11 Handle Control System
Slotting And Side Hole Machining Example In LNC MW5800A

The steps are as follows. Part1 Slotting Machining Press “MPG DRN”until the green light is on Press “MEM”until the green light is on Press “CYCLE START”,then turn handwheel Press “F%-”,then press “M...
Read more
How To Work In DSP A11 Handle Control System
Rotary Device Machining Example In LNC MW5800A

The steps are as follows. Press “JOG” Move spindle by press “X”、“Z” Press “MPG”,then turn handwheel Choose “SETUP”,then choose G54 Choose “TEACHIN”,then choose “SETX”、“SETY&...
Read more
How To Work In DSP A11 Handle Control System
How To Set The Position Of Tool Magazine In LNC MW5800A

The steps are as follows. Choose “MAINTE”,then input “5”to User and“2222” to Password Choose “SETUP”,then choose “ROW TOOL” Please notice “XCOORD、YCOORD、ZCOORD” Press “MPG”,the...
Read more
How To Work In DSP A11 Handle Control System
How To Set The Position Of Tool Calibration In LNC MW5800A

The steps are as follows. Choose “MAINTE”,then input “5”to User and “2222” to Password Choose “SETUP”,then choose “ATM” Press “MPG”，then turn the handwheel Choose “TEACH IN YX” ...
Read more
How To Work In DSP A11 Handle Control System
How To Set Coordinate System Of Z Axis Gap In LNC MW5800A

The steps are as follows. Press “JOG” Move spindle by press “X”、“Y”、“Z” Press “MPG”,then turn handwheel Choose “SETUP”,then choose “ATM” Choose “Z SET” Choose &ldquo...
Read more
How To Work In DSP A11 Handle Control System
How To Power On Machine And Back To Home In LNC MW5800A

The steps are as follows. Part1 Power On Machine Turn the black button to I-ON Turn the black button to ON Turn the red emergency button Press the green button Part2 Back To Home(Rotary Device) Press “ZRN” Press “Z”fo...
Read more
How To Work In DSP A11 Handle Control System
How To Move Fourth Axis In LNC MW5800A

The steps are as follows. Press “JOG” Press “+4”and “-4”for rotary spindle The video is as follows.

Read more
How To Work In DSP A11 Handle Control System
How To Move Axis And Rotary Device In LNC MW5800A

The steps are as follows. Press “JOG” Press “X”、“Y”、“Z”,for move the spindle Press “CW” Press “STOP” Press “F3”for moving rotary device Press “F6”for stopping rotary...
Read more
How To Work In DSP A11 Handle Control System
How To Measure The Length(height) Of Tool In LNC MW5800A

The steps are as follows. Choose "MONITOR", then choose "MDI" Input tools number, then choose "LOGIN" Press "F5", then press "MPG DRN" Turn the handwheel for adjusting "FO" and "RTO" Press "...
Read more
How To Work In DSP A11 Handle Control System
How To Input And Execute File In LNC MW5800A

The steps are as follows. Part1 Input File Insert U disk Choose “FDIT GRP”,then choose “FILE MGT” Choose “USB DISK IMP” Choose the file you need,choose “SEL”,then choose “TRER” Part2 Execute File...
Read more
How To Work In DSP A11 Handle Control System
How To Change Tool In LNC MW5800A

The steps are as follows. Part1 Manually change tool  Press green button and unplug shank Press green button and install shank Part2 Automatic  change tool  Please notice “T. NO.” Choose “MONTTOR”,then choo...
Read more
How To Work In DSP A11 Handle Control System
How To Change Rotary Device To Fourth Axis In LNC MW5800A

The steps are as follows. Choose“MAINTE” Input “5”to User and “2222”to Password Choose “PARAM” Choose “AX.SV” Choose 70038,then input “0”to “S1” Choose “AXIS BASE”,the...
Read more
Furniture CNC
CNC Router
Laser Machine
Quick Links
Policy : Payment Policy Privacy Policy Refund Policy Shipping Policy Return Policy Guarantee and Warranty
WhatsApp