Introduction:
This is a nesting CNC router machine with high efficiency for panel furniture production. It is equipped with a carousel tool magazine, automatic loading, unloading, and labeling platforms. All these configurations improve work efficiency and save labor costs significantly.
Major parameters of this CNC router
| Model |
ELECNC-2130ATC |
| Working area |
2100x3000x200mm |
| Spindle |
Italy 9.6kw HSD ATC air cooling spindle |
| Spindle speed |
6000-24000RPM |
| Inverter |
Taiwan 11kw DELTA inverter |
| Tool magazine |
Carousel type auto tool changer with 8 tools |
| Control system |
Taiwan SYNTEC6MB control system with MPG handle wheel |
| Motor and driver |
850w Japan Yaskawa servo motors and drivers |
| Working Table |
Vacuum and T-slot working table |
| limit switch |
Japan OMRON limit switch |
| Reducer |
Japan SHIMPO Reducer |
| Lubrication system |
New type 1.5L big Automatic lubrication |
| Voltage |
380v, 3phase, 50HZ |
| Vacuum pump |
German Becker pump/air type vacuum pump/ water circulation vacuum pump |
| Dust collector |
1.5kw double bags dust collector system |
| Tool sensor |
Automatic tool sensor calibration |
Contact us to know more about this machine.
